Moments and beams in equilibrium
A moment is the turning effect of a force. For a beam that is not moving, the forces balance and so do the moments, which gives two equations to find unknown supports or positions.
Part 1 of 3: Learn it
In short
- The turning effect of a force is the force times its perpendicular distance from the pivot, measured in N m.
- In equilibrium: resultant force = 0 and clockwise moments = anticlockwise moments about any point.
- When a beam is about to tilt about one support, the reaction at the other support is zero.
Where this is in your specification
Spec points: DfE S1 (AQA 7357 S1, Edexcel 9MA0 Mechanics topic 9, OCR A H240 3.04)
| Board | Topic: Moments |
|---|---|
| DfE content | S1 |
| AQA 7357 | S1 |
| Edexcel 9MA0 | Mechanics topic 9 |
| OCR H240 | 3.04 |
The moment of a force
Multiply the force by the perpendicular distance from the point to the line of action of the force. State the direction: clockwise or anticlockwise. A force whose line passes through the point has no moment about it.
Equilibrium
- Resolve vertically: total upward force = total downward force.
- Take moments about a point: the clockwise total matches the anticlockwise total.
- Choose the point where an unknown force acts, so that force drops out of the equation.
Modelling beams
A uniform beam has its weight acting at its midpoint. A non-uniform beam has its centre of mass somewhere else, which may be the unknown. A rod or light beam has no weight. On the point of tilting about a support, the beam has just lost contact with the other support, so that reaction is zero.
Find the moment of a 25 N force acting 0.4 m from a pivot.
Show the answer
25 × 0.4 = 10 N m.
Part 2 of 3: See it worked
Worked examples
Example 1
A uniform plank AB is 4 m long and weighs 60 N. It rests on supports at A and at C, 3 m from A. Find the reactions.
- Weight acts at the midpoint, 2 m from A
- Moments about A: R_C × 3 = 60 × 2, so R_C = 40 N
- Vertically: R_A + 40 = 60, so R_A = 20 N
Answer: 20 N at A and 40 N at C.
Example 2
On a seesaw pivoted at its centre, a 300 N child sits 1.5 m to the left. Where must a 450 N child sit to balance it?
- Anticlockwise moment: 300 × 1.5 = 450 N m
- Clockwise moment: 450 × d
- 450d = 450
Answer: 1 m to the right of the pivot.
Common mistakes
- Using a distance that is not perpendicular to the force.
- Forgetting the beam's own weight.
- Taking moments about a point but still including the force acting there.
- Assuming both reactions are non-zero when the beam is on the point of tilting.
Where does the weight of a uniform rod act?
Show the answer
At its midpoint.
Part 3 of 3: Test yourself
Check yourself
Answer each one in your head or on paper first, then open it to check.
Find the moment of a 25 N force acting 0.4 m from a pivot.
25 × 0.4 = 10 N m.
Where does the weight of a uniform rod act?
At its midpoint.
What does "light" mean for a rod in a mechanics question?
It has negligible mass, so its weight is ignored.
Jobs that use this
- Structural engineer (öffnet einen neuen Tab)
- Civil engineer (öffnet einen neuen Tab)
- Mechanical engineer (öffnet einen neuen Tab)
Each link opens the job profile on the National Careers Service (England). In the rest of the UK: My World of Work (Scotland), Careers Wales, nidirect careers (Northern Ireland).
Diese Lernzettel sind auf Englisch, weil sie britischen Prüfungslehrplänen folgen.
Full lessons and marked practice for this course are coming soon to Brainlag Learn. See courses